[Observium] Support

[Dave Bats]

Dear Observium Team,,

We need your support on this, we try to install MIB's from Eltek(power supply tool) in Observium. We did receive the MIB's from Eltek. After install the MIB's and reboot we see that the system is trying to Read the Eltek MIB's but we see that OID's in the system are not recognized.

Is there a way how we can solve this problem, do we need to add some script in Observium to make it work?

You support is more than welcome!


Kind Regards,
Dave Bats

[Tom Laermans]

http://www.observium.org/wiki/FAQs#I_have_a_device_which_isn.27t_supported.2C_what_can_I_do.3F

A MIB file does not add support to Observium, code (or at least
definitions) need to be written.

Tom

Post by Dave Bats
Dear Observium Team,,
We need your support on this, we try to install MIB’s from Eltek(power
supply tool) in Observium. We did receive the MIB’s from Eltek. After
install the MIB’s and reboot we see that the system is trying to Read
the Eltek MIB’s but we see that OID’s in the system are not recognized.
Is there a way how we can solve this problem, do we need to add some
script in Observium to make it work?
You support is more than welcome!
Kind Regards,
Dave Bats
_______________________________________________
observium mailing list
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

[Dave Bats]

Thanks Tom,

To write the script, this can be done by Observium?

Dave

From: observium [mailto:observium-***@observium.org] On Behalf Of Tom Laermans
Sent: Thursday, June 25, 2015 9:01 AM
To: Observium Network Observation System
Subject: Re: [Observium] Support


http://www.observium.org/wiki/FAQs#I_have_a_device_which_isn.27t_supported.2C_what_can_I_do.3F

A MIB file does not add support to Observium, code (or at least definitions) need to be written.

Tom

On 25/06/2015 08:26, Dave Bats wrote:
Dear Observium Team,,

We need your support on this, we try to install MIB's from Eltek(power supply tool) in Observium. We did receive the MIB's from Eltek. After install the MIB's and reboot we see that the system is trying to Read the Eltek MIB's but we see that OID's in the system are not recognized.

Is there a way how we can solve this problem, do we need to add some script in Observium to make it work?

You support is more than welcome!


Kind Regards,
Dave Bats





_______________________________________________

observium mailing list

***@observium.org<mailto:***@observium.org>

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium